Directional Control Cartridge Valve

Check Poppet Reverse Valve designed for use as a blocking or load-holding device.

Cartridge Check Valve. Main use is as a blocking or load-holding device. The Dual Pilot to Open Check Valve allows flow passage from port B to A: the cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at port B to open to A. The flow is blocked in the opposite direction (B to A).

Ball Type Cartridge Check Valve is used to preferentially connect the cut-off oil circuit of the high-pressure oil circuit.The Ball Type Cartridge Check Valve consists of a steel ball that can seal against one of two adjacent seats, providing a path from the highest pressure signal to another function. When one inlet port is pressurized, the ball or poppet is forced against the opposite seat, blocking that inlet and providing a flow path to the outlet port.

JSF08-01 family of 2-position, 3-way ball type Shuttle Valve feature a space and cost saving design that fits in an industry common cavity and can operate with hydraulic system flows as high as 50 lpm and pressures up to 420 bar. The simple and effective ball type construction features very fast operation with very low leak performance and is ideal for sequencing, load sensing, or communicating the highest pressure within a specific section of the hydraulic circuit.

Hydraulic Operated Directional Valve, slide valve type, two-position three-way type. External control leakage to atmosphere, used for remote control of the opening and closing of the three-way oil circuit.